Have you ever experienced having so many challenges with your car and brought it often to the mechanic? And when you are at the mechanic what they would tell you? He would probably tell you that you have nothing to worry about since that everything is being taken care of and they are experts in this field, so they solved the problem for you. Perhaps they will tell you to spend $12 for the fluid, $30 on this part, and $60 on that and so on. You might be astonished on how did they know? Well, nowadays it is much easier to detect car problems because of a recent advancement in car diagnostics technology, the OBD II code scanner.
What is the OBD II code scanner and what are its functions? The OBD II code scanner is a specialized plug which applies to car models from 1996 onwards. This serves as a computer interface that provides a standardized emission monitoring and other vital systems. The OBD II code scanner is useful to utilize and very handy at the same time, as it also has a OBD code reader.
When connected, it will give you updated news about the status of your vehicle and helps you monitor or detect engine malfunctions. Some of the common engine-related failures could arise from the fluid or oil, fuel injection, spark plug, throttle, etc. It enables you to identify the specific problems of your car by presenting alpha-numeric codes that represent the vital parts of your vehicles that related to the engine. The OBD II code scanner is indeed a hero for many car owners who often experience car problems. Not only that it accurately identifies vehicle malfunctions, but it also shows results fast allowing you to save time and energy. It is a pity to imagine before that car owner kept on bringing their rides back to the shop to be repaired because the mechanics could not easily find out which specific parts are problematic. As a result, more money wasted, and owners lose their temper
Now that we understand the importance of OBD II code scanner, how do I find the OBD II connector in my car? How would I recognize it? The connectors can found near the driver’s foot area.The Law mandates that the connectors in all vehicles should be located within three feet of the driver and must not need special equipment to access. To start your search, place your top in the foot area, uncover the fuse box, and start finding around. It is not that difficult to find actually.
There are also more advanced OBD II code scanner models available in the market today. These have unique features which are not available in standard models such as vehicle performance analysis which is ideal for weekend driving.
How to use OBD scanner to reset your engine.
Since 1996, all cars must use an onboard diagnostic system to monitor the kinds of sensors, valves, and solenoids on the car, Honda also is without exception. When there is a problem with such a component, you’ll see a Check Engine light illuminate on the instrument panel. This light means that you need to diagnose the problem and repair it. So as to properly troubleshoot the possible problems alerted by this warning light, you will need to buy an on-board diagnostic (OBD) scan tool (OBD scan tool) from a car parts shop. These devices can read the diagnostic system and retrieve the OBD codes from the computer so that you can repair your Honda car.
You’ll need OBD scan tool and Honda owner’s manual for this job.
Find out the OBD scan post on the car: This will locate to the left of the fuse panel, in the driver’s side footwell. You don’t need to remove the fuse panel to access it, but it will be a little easier to work in that area if you do so. Pull down on the fuse panel cover with your fingers to remove it.
Insert the OBD plug into the 16-pin access port. This connector port in Hondas is easily visible, but so as to find out it, you will need to position yourself into the footwall area and look under the instrument panel, to the left of the fuse panel. The scan tool insert should connect to the access port with no problem.
Power on the OBD diagnostic scan tool and turn the ignition on your Honda to the “II” position.
Wait for the scan tool display to read “OK,” then shut down the ignition and disconnect the scan tool.
Scroll through the menu options on the scan tool until you come to the “Stored codes” section. Choose “Stored codes” and use your OBD scanner user manual to translate the trouble codes you’ve reset. There are a lot of online stores over the internet; you can find that what you need online.